Area of research
Ceramics and Composites · Automotive Engineering
Research interest
Research interests include Materials science, Porosity, Ceramic, Composite material, Geopolymer, and Fabrication.
Porous spherical g-C3N4/geopolymer composite for photo-Fenton-like degradation of tetracycline hydrochloride
Coupled advanced oxidation process systems for enhanced degradation of antibiotics: a review
Effect of sol types on the mechanical properties of 3D printed silica ceramics
Insight into the limitation of the Beer–Lambert law in stereolithography ceramic 3D printing: a study on irradiance parameters and slurry curing
Improving wear resistance of 3D printed alumina-based ceramics via sintering temperature
Improved performance of 3D printed alumina ceramics by adding polystyrene microspheres
Nasal inhalation of antiviral microparticulate powders to target early infection of upper airways
Effect of the electrosteric stabilization mechanism, sintering additives, and sintering process on the properties of 3D‐printed alumina ceramics
Effect of photosensitive resins on the properties of vat photopolymerization‐based 3D printed alumina ceramics
Improved 3D printed silica ceramics via solid content, sintering temperature, and sintering aids
3D printing of ceramics: Advantages, challenges, applications, and perspectives
A review on metakaolin-based porous geopolymers
Shellular SiCN ceramics with integrated structure and function realizing full electromagnetic wave absorption in the X-band
Exploiting bifunctional 3D-Printed geopolymers for efficient cesium removal and immobilization: An approach for hazardous waste management
Vat photopolymerization 3D printing SiBCN ceramic metamaterials with strong electromagnetic wave absorption
3D‐printed green and low‐cost porous g‐C <sub>3</sub> N <sub>4</sub> /geopolymer components for the removal of methylene blue from wastewater
Volumetric Additive Manufacturing of SiOC by Xolography
Linear volumetric additive manufacturing of zirconia from a transparent photopolymerizable ceramic slurry via Xolography
Ultra-lightweight silicon nitride truss-based structures fabricated via UV-assisted robot direct ink writing
Improved 3D printed silica ceramics impregnated with an alumina sol by controlling atmosphere, vacuum pressure and holding time
Effect of sol impregnation and changes in sol pH on mechanical properties of 3D printed alumina ceramics
Improved precision and mechanical properties of 3D‐printed silica ceramics via sintering temperature optimization
Effect of impregnation temperature and concentration of alumina sol on the properties of 3D printed silica ceramics
Photocurable Sol–Gel Formulations for the Fabrication of Titanium Carbide/Carbon Nanocomposites via Digital Light Processing
Effect of pH and Ratio of Alumina Sol on Properties of 3D Printed Silica Ceramics
Open-cell mullite ceramic foams derived from porous geopolymer precursors with tailored porosity
Ultra-rapid debinding and sintering of additively manufactured ceramics by ultrafast high-temperature sintering
Fabrication and application of porous materials made from coal gangue: A review
Enhanced mechanical properties of 3D printed alumina ceramics by using sintering aids
Wide-temperature-range multispectral camouflage enabled by orientation-gradient co-optimized microwave blackbody metastructure coupled with conformal MXene coating