Area of research
Mechanical Engineering · Aerospace Engineering
Research interest
Research interests include Materials science, Nucleation, Precipitation, Metallurgy, Dislocation, and Alloy.
Experimental measurement of dislocation density in metallic materials: A quantitative comparison between measurements techniques (XRD, R-ECCI, HR-EBSD, TEM)
Revisiting Precipitation kinetics in Mg-Zn alloy – a multi-characterization and modeling study
In situ synchrotron study of sintering of gas-atomized Ti-6Al-4 V powders using concomitant micro-tomography and X-ray diffraction: Effect of particle size and interstitials on densification and phase transformation kinetics
Carbon-induced strengthening of bcc iron at the atomic scale
Precipitation of <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" altimg="si3.svg"> <mml:msup> <mml:mi>γ</mml:mi> <mml:mrow> <mml:mo>″</mml:mo> </mml:mrow> </mml:msup> </mml:math> in Inconel 718 alloy from microstructure to mechanical properties
Modeling of interstitials diffusion during debinding/sintering of 3D printed metallic filaments: Application to titanium alloy and its embrittlement
Microstructural study of the NbC to G-phase transformation in HP-Nb alloys
Precipitation and grain growth modelling in Ti-Nb microalloyed steels
Disentangling and Lamellar Thickening of Linear Polymers during Crystallization: Simulation of Bimodal and Unimodal Molecular Weight Distribution Systems
Crystallization and Molecular Topology of Linear Semicrystalline Polymers: Simulation of Uni- and Bimodal Molecular Weight Distribution Systems
Phase Field Modelling of Abnormal Grain Growth
Over-ageing of an Al-Mg-Si alloy with silicon excess
A novel approach to investigate delta phase precipitation in cold-rolled 718 alloys
Mixed-mode model for ferrite-to-austenite phase transformation in dual-phase steel
Nanocompression of secondary particles of silica aerogel
Role of the Intercrystalline Tie Chains Network in the Mechanical Response of Semicrystalline Polymers
Elasticity and strength of silica aerogels: A molecular dynamics study on large volumes
Crystallization of finite-extensible nonlinear elastic Lennard-Jones coarse-grained polymers
Modeling of the Recrystallization and Austenite Formation Overlapping in Cold-Rolled Dual-Phase Steels During Intercritical Treatments
Formation of carbon Cottrell atmospheres and their effect on the stress field around an edge dislocation
Integrated modelling of a 6061-T6 weld joint: From microstructure to mechanical properties
Characterization and modeling of oxides precipitation in ferritic steels during fast non-isothermal consolidation
Plastic Deformation Mechanisms of Semicrystalline and Amorphous Polymers
In situ investigation of MgO nanocube deformation at room temperature
In situ characterization of microstructural instabilities: Recovery, recrystallization and abnormal growth in nanoreinforced steel powder
Monte Carlo and molecular dynamics simulations of screw dislocation locking by Cottrell atmospheres in low carbon Fe–C alloys
Tailoring the microstructure and the mechanical properties of ultrafine grained high strength ferritic steels by powder metallurgy
Constitutive model for nickel alloy 690 (Inconel 690) at various strain rates and temperatures
Influence of oxide volume fraction on abnormal growth of nanostructured ferritic steels during non-isothermal treatments: An in situ study
Correlation of structure and mechanical response in solid-like polymers