Area of research
Aerospace Engineering · Electrical and Electronic Engineering
Research interest
Research topics from publications: The shift of microbial community under the adjustment of initial and processing pH during bioleaching of chalcopyrite concentrate by moderate thermophiles; Dissolution and Passivation of Chalcopyrite during Bioleaching by Acidithiobacillus ferrivorans at Low Temperature; Bioleaching and Electrochemical Behavior of Chalcopyrite by a Mixed Culture at Low Temperature. Representative work: Our knowledge on the dissolution and passivation mechanisms of chalcopyrite during bioleaching at low temperature has been limited to date. In this study, an Acidithiobacillus ferrivorans strain with high tolerance to heavy metals and UV radiation was used for chalcopyrite bioleaching. At 6 °C, no apparent precipitate was detected on the mineral surface after bioleaching using a scanning electron microscope (SEM). X-ray diffraction (XRD) revealed that the ore residue contained only chalcopyrite and quartz. X-ray photoelectron spectroscopy (XPS) analysis revealed that the content of S0 on the mineral surface remained low and the ratio of SO42− decreased from 46.7% to 20.9%, but the amount of Low-temperature biohydrometallurgy is implicated in metal recovery in alpine mining areas, but bioleaching using microbial consortia at temperatures <10°C was scarcely discussed. To this end, a mixed culture was used for chalcopyrite bioleaching at 6°C. The mixed culture resulted in a higher copper leaching rate than the pure culture of Acidithiobacillus ferrivorans strain YL15. High-throughput sequencing technology showed that Acidithiobacillus spp. and Sulfobacillus spp. were the mixed culture’s major lineages. Cyclic voltammograms, potentiodynamic polarization and electrochemical impedance spectroscopy unveiled that the mixed culture enhanced the dissolution reactions, decreased the co