Area of research
Civil and Structural Engineering · Building and Construction
Research interest
Research interests include Structural Behavior of Reinforced Concrete, Structural Load-Bearing Analysis, Structural Response to Dynamic Loads, and Seismic Performance and Analysis.
Time-variant resilience-based multi-objective seismic design optimization framework for aging RC columns in corrosive environments
Time-variant resilience-based multi-objective seismic design optimization framework for aging RC columns in corrosive environments
Assessment and design of restrained reinforced concrete beams subjected to hysteresis elongation effects
Long-term seismic resilience and sustainability prediction of coastal highway bridges subjected to atmospheric chloride-induced corrosion
Construction sustainability through reusability: Establishing reuse design rules for CFS channel columns subjected to local buckling
Reusability evaluation of interlocking column-base connection: An experimental and numerical study
Numerical simulations on high strength bolted shear connections for simple on-site assembly of composite beams
Parametric evaluation of seismic performance for high-rise modular buildings with RC walls: Connections and behaviour factors
Cyclic torsion behavior of tapered prestressed high-strength CFDST columns for wind turbine towers: Experiments and a mechanics-based design model
Multiscale investigation of ternary precursor proportioning in engineered geopolymer composites: Effects of silica fume replacement ratio and GGBS content
Tensile behaviour and microstructure of wire-based laser directed energy deposited normal- and high-strength steels
Experimental study on the flexural behavior of a novel prestressed tapered composite box girder with concrete-encased corrugated steel webs and steel bottom plate under negative bending
Sensitivity of Risk‐Based Demand Curves to Analytical Fragility Function Fitting Using Multiple‐Stripe Analyses
Assessment and design of RC frames incorporating effects of restraint to beam hysteresis elongation
Load Transfer Mechanisms in Welded Fin Plate-to-CFST Column Connections
Experimental assessment of CFST beam-columns strengthened with CFRP grid-reinforced ultra-high-strength engineered cementitious composites
Service life prediction of reinforced concrete marine structures under coupled chloride-induced corrosion and freeze-thaw cycles
Sustainable engineered geopolymer composites incorporating recycled waste rubber as full replacement of fine aggregates
Mechanical properties of sustainable engineered geopolymer composites with sodium carbonate activators
If rockets are reusable, why not buildings? Reuse evaluation for cold-formed steel unequal-leg lipped angle columns
Experimental assessment of main cable strand rapid traction in super long-span suspension bridges
Risk‐Based Structural Seismic Response Assessment of Large‐Scale Jacket‐Supported Offshore Wind Turbines
Finite element modelling of concrete-filled double-skin steel stiffened tubular chord-to-SHS steel brace T-joints: Behaviour and design
Fatigue behavior and design of reinforced concrete beams strengthened with PCM-BFRP grids
Seismic risk-based assessment of acceleration demands on a reference 10-MW jacket-supported offshore wind turbine under combined horizontal and vertical excitations
Experimental assessment of freeze-thaw deterioration in compression-cast fiber-reinforced concrete
Disassembly and Structural Reuse Potential of Steel-Timber Shear Connections with Screws
Prediction of axial compressive stresses in ultra-high-performance concrete blocks using non-destructive ultrasonic techniques
Duration-dependent seismic collapse capacity prediction for steel moment-resisting frames
Seismic Design Forces for Ancillary Elements in Multi-storey Steel Framed Structures