Area of research
Mechanical Engineering · Automotive Engineering
Research interest
Research interests include Aluminum Alloys Composites Properties, Additive Manufacturing and 3D Printing Technologies, Microstructure and mechanical properties, and Additive Manufacturing Materials and Processes.
Application of soft computing techniques in the optimization of 3D-printed piezoresistive sensors
Strategies for metallic powder reuse in powder bed fusion: A review
Evolution of Material Properties and Residual Stress with Increasing Number of Passes in Aluminium Structure Printed via Additive Friction Stir Deposition
Tensile Behavior of 3D Printed Polylactic Acid (PLA) Based Composites Reinforced with Natural Fiber
Effect of in-situ layer-by-layer rolling on the microstructure, mechanical properties, and corrosion resistance of a directed energy deposited 316L stainless steel
Modelling dynamic recrystallisation in magnesium alloy AZ31
In the mix: The effect of wood composition on the 3D printability and mechanical performance of wood-plastic composites
Self-repair of cracks and defects in clay: a review of evidence, mechanisms, theories and nomenclature
Modelling the temperature and texture effects on the deformation mechanisms of magnesium alloy AZ31
Factors that affect the properties of additively-manufactured AlSi10Mg: Porosity versus microstructure
Interplay between the effects of deformation mechanisms and dynamic recrystallization on the failure of Mg-3Al-1Zn
Processing magnesium at room temperature
Predicting the fatigue life of an AlSi10Mg alloy manufactured via laser powder bed fusion by using data from computed tomography
Effects of microstructure on the mechanical properties of Ti2AlC in compression
Rethinking Timber: Investigation into the Use of Waste Macadamia Nut Shells for Additive Manufacturing
Interfacial electro-mechanical behaviour at rough surfaces
Fabrication and characterization of microstructure of stainless steel matrix composites containing up to 25vol% NbC
Effects of strain rate on the microstructure evolution and mechanical response of magnesium alloy AZ31
Role of starting texture and deformation modes on low-temperature shear formability and shear localization of Mg–3Al–1Zn alloy
The Role of Surface Structure in Normal Contact Stiffness
Fatigue crack initiation life prediction for aluminium alloy 7075 using crystal plasticity finite element simulations
The effect of surface mechanical attrition treatment on low temperature plasma nitriding of an austenitic stainless steel
An automated method of quantifying ferrite microstructures using electron backscatter diffraction (EBSD) data
Three-dimensional crystal plasticity finite element simulation of nanoindentation on aluminium alloy 2024
An Overview of the Effect of Nb in Strengthening Castrip<sup>®</sup> Steel
Modeling bending of α-titanium with embedded polycrystal plasticity in implicit finite elements
Three‐dimensional nanofabrication of polystyrene by focused ion beam