Area of research
Mechanical Engineering · Aerospace Engineering
Research interest
Research interests include Advanced Welding Techniques Analysis, High-Temperature Coating Behaviors, Aluminum Alloys Composites Properties, and Advanced materials and composites.
Exceptional mechanical properties of dual-phase heterogenous structure in Cf/C and superalloy joints via cold spray additive manufacturing-assisted brazing
Investigation on the weldability of synergistically double-sided friction stir welding 2024-T3 aluminum alloy joints
Enhancing the high-temperature performance of high-entropy ceramic/Zr-4 joints via Ni-assisted reactive brazing
Failure process and mechanism of cold spraying repaired cast ZM6 alloy plates under in-plane loading
Electric field suppresses intermetallics via enhanced diffusion and non-equilibrium phase transformation solid solution in ultrafast brazed Ti2AlNb/Ti60 joints
A novel Cu/Ni-free Ti-Co-Fe-Sn amorphous filler for high-strength brazing of Ti2AlNb/Ti60 joints: From atomic-scale bonding to macro-scale performance
Microstructure evolution and brazing mechanism of (Ti0.2Zr0.2Ta0.2Nb0.2Cr0.2)C high entropy ceramic joint brazed with Ni-based filler
Synergistically double-sided FSW with dual-tool interaction
Microstructure evolution and strain partitioning of Cf/C-Nb brazing joints mediated by cold-sprayed Ti-Co interlayer
Repair of through holes in aluminum alloy plates using synergistically double-sided probeless friction stir spot welding
Laser Beam Oscillation Enhances the Corrosion Resistance of AA2219 Aluminum Alloy Welds: Microstructure Homogenization and Residual Stress Regulation
Strain Partitioning Strengthening Mechanisms for Multi-Phase Gradient Structure of Cf/C-Nb Joints through Cold sprayed Ti-Co Filler
Fatigue crack propagation behaviors of friction stir welded sheets and profiles AA7050-T7451 aluminum alloy joints: Microstructure dependence
Effect of TiB2 nanoparticles on the microstructure and mechanical properties of friction stir welded in-situ TiB2/2024Al composite joints
Insights into the coupled effects of powder size and surface oxide film on deposition, microstructure and performance of cold spray additive manufactured Ti
Synergistic regulation of microstructure and residual stress via laser oscillation for enhanced corrosion resistance of 2219 aluminum alloy butt joints
Insight into the role of interparticle bonding on tensile properties of cold spray additively manufactured copper
High ductility induced by twin-assisted grain rotation and merging in solid-state cold spray additive manufactured Cu
Screw-fed powder-based additive friction stir deposition: A study on pure aluminum
Enhanced in-situ reinforcement evolution and superior wear resistance by changing Y2O3 addition in Ti6Al4V-based WC gradient coatings through laser cladding
Synergistically double-sided probeless friction stir spot welding: The effect of tool rotation modes on joint formation and strengthening mechanisms
Plastic flow and interfacial bonding behaviors of embedded linear friction welding process: Numerical simulation combined with thermo-physical experiment
The role of annealing temperature on fracture of cold-sprayed copper deposits: Toward damage-tolerant additive manufacturing process
Microcracks self-healing: A novel strategy to enhance oxidation and cracking resistance in SiCf/SiC-GH536 brazed joints
Role of Zinc Interlayer Reactions on Mechanical Performance of Al/Mg Dissimilar Refill Friction Stir Spot Welds
Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding
Microstructure Characterization and Mechanical Properties of Dissimilar Al/Al-Li Alloy T-Joints Welded by Friction Stir Welding
A novel three-dimensional profile prediction method integrated with particle acceleration simulation and layer stacking in cold spray additive manufacturing
Research on Creep Deformation of Dissimilar FSWed T-Joints Under Different Ultrasonic Vibration Modes: Experiment, Constitutive Model, and Simulation Verification.
Understanding the interfacial bonding mechanism and its impact on mechanical performance in SS316L/Cu functionally graded materials produced by laser powder bed fusion