Area of research
Mechanical Engineering · Aerospace Engineering
Research interest
Research interests include Materials science, Composite material, Tomography, Microstructure, Porosity, and Nucleation.
In situ synchrotron study of sintering of gas-atomized Ti-6Al-4 V powders using concomitant micro-tomography and X-ray diffraction: Effect of particle size and interstitials on densification and phase transformation kinetics
4D characterisation of void nucleation, void growth and void coalescence using advanced void tracking algorithm on in situ X-ray tomographic data
X-ray computed tomography
Detailed experimental validation and benchmarking of six models for longitudinal tensile failure of unidirectional composites
Evolution of fibre deflection leading to kink-band formation in unidirectional glass fibre/epoxy composite under axial compression
Scale up of single-chamber microbial fuel cells with stainless steel 3D anode: Effect of electrode surface areas and electrode spacing
Tomography Imaging of Lithium Electrodeposits Using Neutron, Synchrotron X-Ray, and Laboratory X-Ray Sources: A Comparison
Large scale additive manufacturing of artificial stone components using binder jetting and their X-ray microtomography investigations
Mechanical properties of unidirectional, porous polymer/ceramic composites for biomedical applications
Laser Powder Bed Fusion printability of cobalt-free steel powders for manufacturing injection molds
A synchrotron computed tomography dataset for validation of longitudinal tensile failure models based on fibre break and cluster development
Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg
A rationale for the influence of grain size on failure of magnesium alloy AZ31: An in situ X-ray microtomography study
The Concept of Effective Porosity in the Discharge Rate Performance of High-Density Positive Electrodes for Automotive Application
A Novel Method for In Vitro 3D Imaging of Dissecting Pressurized Arterial Segments Using X-Ray Microtomography
Quantification of the Local Topological Variations of Stripped and Plated Lithium Metal by X-ray Tomography
Fabrication and characterization of hardystonite-chitosan biocomposite scaffolds
Crack nucleation and growth in α/β titanium alloy with lamellar microstructure under uniaxial tension: 3D X-ray tomography analysis
Experimental study of the fiber orientations in single and multi-ply continuous filament yarns
Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches
Thermal conductivity of highly porous metal foams: Experimental and image based finite element analysis
3-D printing of chitosan-calcium phosphate inks: rheology, interactions and characterization
Comparison of aluminium foams prepared by different methods using X-ray tomography
Analysis of hybrid fracture in α/β titanium alloy with lamellar microstructure
In situ analysis of plasticity and damage nucleation in a Ti-6Al-4V alloy and laser weld
Microstructure characterization by X-ray tomography and EBSD of porous FeCr produced by liquid metal dealloying
Revealing the Effect of Local Connectivity of Rigid Phases during Deformation at High Temperature of Cast AlSi12Cu4Ni(2,3)Mg Alloys
Characterization of 100Cr6 lattice structures produced by robocasting
In-situ X-ray tomographic study of the morphological changes of a Si/C paper anode for Li-ion batteries
Tensile rupture of medial arterial tissue studied by X-ray micro-tomography on stained samples